Sunday, February 27, 2011

Fabric-Covered Magnetic Necklace Holder

This project ended up being a little more time-consuming than I originally thought it would be. I thought I'd go to Michael's, find a steel magnetic board kind of like the dry erase boards, cover it in fabric, and be done.

Michael's doesn't sell those and doesn't know who, if anyone, does. Michael's is also in the same strip mall as Home Depot for me.

So I started out by purchasing a basic black 16x20 frame (40 percent off last week). It was the kind that already has double matting in it with spacers in between the mats. Even though you won't use the matting, this is important because you need room for your materials that you're putting in your frame. If you buy a basic frame, you might not be able to get the back on and the metal things slipped back in the slots, even with the glass out.

I went to Home Depot and bought two pieces of some kind of steel. I had a guy help me. I had to buy two pieces because singularly they weren't big enough. They had to be cut, and I was disillusioned to find out that Home Depot doesn't cut everything for a price. But the guy that was helping me used to work in metal and cut it for me. I had it cut 15 7/8" x 19 7/8" because I knew I'd be wrapping some fabric around the edges and I wanted it to go back in the frame. Good thing I did since it was a snug fit on one of the corners.

I bought the cement the guy recommended. It went on like rubber cement, and then I put the metal on a thin piece of board I bought and had cut to size.

I covered it with two layers of white muslin. I just pulled it taut and hot glued it down.

I could still see the line faintly through the muslin where the two pieces of metal met. If I'd used something darker or with a print it wouldn't have shown. I decided to hot glue a cute piece of ribbon across the middle where that line was.

I used my magnets I made in lots of different patterns. Since it's in my bedroom and my walls will be blue, I didn't want the background to compete with the wall and I wanted to use all my fun magnets.


I have a bracelet that I wanted to hang up but was too big for a magnet to hold. I hot glued two extra magnets to the back.

Now it's perfect!


I had half of these out on my dresser and the other half were hanging on my lamp from the little knob that you use to turn it on. This is so much better!

I'm linking up to Made by you Mondays at Skip to my Lou.

4 comments:

Mari said...

Brilliant idea! Heather was going to do one with a corkboard, but I really like the magnet idea.

Anonymous said...

You did a great job! I've been hunting around for ideas on how to hang my necklaces!

Sherry @ Lamp Unto My Feet said...

How cute is that?! LOve it!

purecopperjewellery said...

Very nice collection..thanks for sharing..The products sold in Simply Pure Copper make sure that the magnetic fields are aligned properly that will bring good results fast.
Magnetic Necklace Online Store USA

 
Designed by Blogs by Sneaky Momma